-
The drainpipes collect the water from sinks, showers, tubs, and appliances.
-
The waste pipes remove water and material from the toilet.
-
The vent pipes remove or exhaust sewer gases and allow air to enter the system so that the wastewater flows freely.
A typical bathroom sink is a good example of how all these components work together. You probably haven’t spent much time observing the pipes beneath your vanity, but take a look and this is what you’ll see:
-
Water runs down the sink drain into a p-trap (so called because it’s shaped like the letter), which fills up with water to prevent sewer gases and odors from getting into the house through the pipe. This water gets refreshed whenever more water runs through it.
-
A drainpipe attached to the p-trap goes into an opening in the wall.
-
Behind the wall (where you can’t see), a vent line and drainpipe lead to a soil stack, which is the control center of the wastewater system. Drain pipes take the wastewater to the soil stack; through the stack, sewer gases are carried up to the roof through vent lines.