The Nikon D3300 has various controls on the outside on the camera body. On the back of the Nikon D3300, shown in the figure, you find these features:
Infrared receiver: Labeled in the figure, this is one of two receivers that picks up the infrared signal from the optional ML-L3 wireless remote control. The other receiver is on the front-right side of the camera, near the middle of the hand grip.
Viewfinder adjustment dial: Rotate this dial to adjust the viewfinder focus to your eyesight.
AE-L/AF-L button: Pressing this button initiates autoexposure lock (AE-L) and autofocus lock (AF-L).
In playback mode, pressing the button activates the Protect feature, which locks the picture file — hence the little key symbol that appears above the button — so that it isn’t erased if you use the picture-delete functions. (The picture is erased if you format the memory card, however.)
Command dial: After you activate certain camera features, you rotate this dial to select a setting. For example, to choose a shutter speed when shooting in shutter-priority (S) mode, you rotate the Command dial.
Playback button: Press this button to switch the camera into picture review mode.
Menu button: Press this button to access menus of camera options.
Zoom In button: In playback mode, pressing this button magnifies the currently displayed image. Note the plus sign in the middle of the magnifying glass — plus means enlarge.
Zoom Out button: As you can probably deduce from the three symbols that mark this button, it has not one, but three primary functions:
Reduce image magnification during playback: If you magnify an image during playback, pressing the button reduces the magnification amount. The magnifying glass with the minus sign Tips you off to this function.
Display thumbnails during playback: After you press the Playback button to shift to playback mode, pressing the Zoom Out button enables you to switch from single-image view, which shows one photo or movie at a time, to thumbnails view, which displays mulTiple images on the screen.
Press once to display four thumbnails; press again to display nine thumbnails; and press a third time to see 72 itty-bitty thumbnails. A fourth press shifts the display to Calendar playback, which makes it easy for you to locate pictures taken on a particular day.
To cycle back to thumbnails view, press the Zoom In button; keep pressing to reduce the number of thumbnails until you get to single-image view.
Display help screens: The question mark symbol above the button is a reminder that you can press this button to display helpful information about certain menu options.
ibutton: During shooting, pressing this button activates the control strip on the Information and Live View displays, enabling quick access to certain picture settings.
Live View button: As its name implies, this button turns Live View on and off. In Live View mode, the scene in front of the lens appears on the monitor, and you can't see anything through the viewfinder. You then can compose a still photo using the monitor or begin recording a movie.
Multi Selector/OK button: This dual-natured control plays a role in many camera functions. You press the outer edges of the Multi Selector left, right, up, or down to navigate camera menus and access certain other options. At the center of the control is the OK button, which you press to finalize a menu selection or another camera adjustment.
The instruction “Press the Multi Selector left” simply means to press the left edge of the control. “Press the Multi Selector right” means to press the right edge, and so on.
Release Mode button: Press this button to display a screen where you can select the shutter-release mode. By default, the option is set to Single Frame, which results in one picture each time you press the shutter button.
Delete button: Sporting a trash can icon, the universal symbol for delete, this button enables you to erase pictures from your memory card.